Stealth P3 Dust Respirator Face Mask UK

Twin HEPAC pleated encapsulated filters provide up to 99.99% filtration

Suitable for

Work environments requiring a protective face mask including Manufacturing, Healthcare, Dentistry, Construction, Paint Spraying (water based) and other environments with high levels of dust and other particles.

Technology

Latest P3 dust face mask technology including our downward facing exhaust valves to prevent misting of goggles & glasses.

Safety

Stealth dust & particle Face Masks offer the highest protection (P3) against dust, airborne particles, aerosols and sprays with up to 99.99% filtration efficiency.

Filters

Filters up to 99.9% of all airborne particles.

Pre-Filter

Prolongs the life of your filter and gives increased dust protection.

Comfort

Moulded facepiece for ultimate face seal and comfort with over 90% 'fit test' pass rate.

Breathing

Lowest breathing resistance of any P3 face mask available.

Protection

Dust, Particles, Sprays, Fumes and Oil Aerosols.

Downward

Downward facing exhaust valve prevents misting of goggles and glasses.

Face mask body: TPE Medical Grade - Silicone & latex free

Mask strap: Nylon-Polyester

Mask Valve & Fittings: Silicone / Nylon

HEPAC - P3 R D Filter: Synthetic composite / TPE frame

HEPAC - Strap Clips: Nylon

Stealth Lite Sport Packaging: 100% Recyclable Paper card

Specifications

US Shipping

For all US orders, we use USPS Standard Delivery is FREE for orders $50+Orders below this amount are charged $7.99for delivery Please allow up to 2-4working days for delivery Packaging: Recyclable polybag

International Shipping

For all International orders, we use express airmailEU = $15 per shipment (up to 10 working days)Rest of World = $30per shipment (up to 14 working days)

How long should I use my filters for before replacing them?

As HSE guidelines advise, we recommend that you do a maintenance check on your respirator & change your filters every 28 days, with the first day being when you initially use the facemask. This is if you have worn your mask daily for 8 or more hours. After every use, we recommend wiping down your face piece with an antibacterial or alcohol wipe to keep it clean and fresh.

Can I wash the filters in the Stealth P3 Half Mask Respirator?

No, you must not wash the filters. We advise wiping down the facemask and the moulded face piece with an antibacterial wipe after every use and replacing the filters every 28 days – that is if you have used the mask daily for 8 hours or more. See below for links to replacement filters.

Which replacement filters are compatible with the Stealth P3 Half Mask Respirator?

You have a choice between purchasing: Standard replacement filters for Stealth P3 Mask, Nuisance-Odour replacement filters for Stealth P3 Mask. Both filters provide the highest filtration efficiency – removing 99.999% of airborne particles at 0.3 microns and above. The 5PK Stealth P3 Nuisance Odour Filter Pairs are specially designed to eliminate nuisance odours through an additional carbon filter layer. This additional filter layer is the only difference between these two filter options.

I have received my Stealth P3 Half Mask Respirator, but I cannot find the filters. Have they been left out of my order?

No they have not been left out. With the mask you have purchased it comes with twin P3 HEPAC pleated filters already fitted. If you lift the grille at the front of the mask you will see them.

Am I able to wear a visor/googles/ helmets with the Stealth P3 Half Mask Respirator?

Yes absolutely! The Sleek unobtrusive design is to accommodate visors, helmets, spectacles/goggles & other PPE.